High Performance Fuel and Ignition ECU for Nissan 350Z.

Fully programmable ECU interfacing directly with all the standard Nissan sensors and on board computer systems. Taking control of all the essential engine management tasks such as fuel delivery, ignition timing, boost levels, camshaft positioning and correction maps, the Platinum 350Z ECU even interfaces with the factory Nissan CAN bus for on-board diagnostics and troubleshooting.

Features:
• Sequential Fuel Control
• Direct Fire Ignition Control
• Variable Camshaft postion mapping
• Knock Detection
• Engine Rev Limiter
• Closed loop boost control
• Launch control
• Closed loop wideband 02 control
• On board data logging
• Speed density, Alpha-N or MAF tuning
• Additional user definable inputs and outputs
• Windows Software

The Platinum Pro 350Z kit includes:
ECU Programmable Computer,Plug and Play wiring Harness,USB Programming Cable,Instruction Manual (on CD), Programming software

Deatschwerks 300LPH In-Tank Fuel Pump

• Deatschwerks 300 Litre Per Hour In-Tank.
• Same dimensions as a Walbro In Tank fuel pump, fitting kits can be used with this pump.
• Flows 300+ litres per hour.
• E85/Ethanol compatible.
• 3-year no-fault warranty.
• Comes with a universal fitting kit, as pictured, which includes an electrical connector and a 90 degree filter.
• Extremely quiet and reliable turbine impeller.

CLICK BELOW FOR BEFORE AND AFTER FITTING THE EXHAUST

XFORCE Nissan 370Z Performance Twin 2.5" Cat-back system, featuring X-Pipe, twin front hot-dog resonator, Dual Rear mufflers and Dual 4" tips. Deep sports tone and maximum performance gain.

STOPTECH AERO ROTORS - 2 PIECE 72 CURVED VANE FLOATING - 350Z FRONT & REAR ROTORS

THE STOPTECH AEROROTOR KITS ARE DESIGNED TO REPLACE STANDARD ONE PIECE ROTORS AND WORK WITH THE OE CALIPERS. KITS INCLUDE 2-PIECE DIRECTIONAL FLOATING ROTORS WITH DIRECTIONAL BILLET ALUMINIUM AEROHATS. THE PRE-ASSEMBLED FLOATING 2-PIECE ROTORS ALLOW EXPANSION WITHOUT THE DISC CONING. THE KITS ARE UP TO 3.5KGS LIGHTER THAN STOCK ROTORS AND PUSH UP TO 61% MORE AIR FOR BETTER COOLING AND REDUCED FADE ON THE TRACK.

STOPTECH HAS INCORPORATED SEVERAL DESIGN INNOVATIONS TO IMPROVE ROTOR AIRFLOW, COOLING AND HEAT CAPACITY. THE ABILITY TO ABSORB AND DISSIPATE HEAT IS ESSENTIAL TO BRAKING SYSTEM PERFORMANCE. THE UNIQUELY DESIGNED VANES INSIDE THE DISC OPTIMIZE AIRFLOW THROUGH THE ROTOR. THIS IMPROVED DIRECTIONAL DESIGN MINIMIZES TURBULENCE AND FLOWS MORE AIR THAN ANY OTHER ROTOR TESTED. BETTER AIRFLOW MEANS BETTER COOLING AND LESS FADE.

AEROROTOR® VANE DESIGN OFFERS THE BEST AIRFLOW AND COOLING OF ANY VENTED ROTOR. ALL OF OUR ROTORS ARE HEAT TREATED, PRECISION GROUND, SLOTTED OR DRILLED AND BALANCED AT THE FOUNDRY. THE STOP TECH INTERNAL VANE DESIGN WHICH OFFERS BETTER COOLING AS WELL AS THE IRON FORMULATION IS EXTREMELY RESISTANT TO CRACKING.

AEROHATTM DIRECTIONAL BILLET HATS (SECOND PICTURE ON LEFT) - A RACING FIRST

PRICE: $1,115.00 FRONT PAIR
PRICE: $1,355.00 REAR PAIR

NISMO OIL FILTER

FEATURES:

• 21% LESS PRESSURE LOSS
• 24% INCREASE IN FILTRATION
• 10% LESS FLOW RESISTANCE
• 37% INCREASED LIFE

NISSAN 350Z 2004-UP Z33 "VS1 STYLE" REAR WING

VENTED CARBON FIBRE BONNET WITH HIGH GLOSS FINISH

CARBON FIBRE BONNET WITH HIGH GLOSS FINISH

BOLTS STRAIGHT ON - CARBON FIBRE OR FIBREGLASS

VS3 front bar

PRICE: $595

Side skirts  $395

VTT front bar

PRICE: $595

Side skirts $395

 VS12 front bar

BOLTS STRAIGHT ON

SUITS UNIFILTER POD FILTER

FEATURES:

• STRAIGHT BOLT ON FITMENT
• REPLACEABLE 1050 STEEL FRICTION SURFACE
• 6061 T6 BILLET ALUMINIUM
• GRADE 10 AEROSPACE FASTNERS
• EXCLUSIVE STEPPED DOWELS
• 1050 HARDENED RING GEAR
• CNC MACHINED AT CONSTANT SURFACE SPEED
• WEIGHS APPROX 5KG

CLICK HERE FOR MORE INFORMATION

THIS KIT USES AN 850KG PRESSURE PLATE WITH 25% INCREASED CLAMP LOAD OVER THE FACTORY ITEM.

CLUTCH PLATE USES A DAMPENED HUB WITH CUSHIONED ORGANIC FACINGS.

GREAT DRIVEABILITY - HIGHER TORQUE CENTRE

THIS KIT USES AN 850KG PRESSURE PLATE WITH 25% INCREASED CLAMP LOAD OVER THE FACTORY ITEM.

CLUTCH PLATE USES 5 BUTTON DAMPENED HUB WITH
SOLID CERAMIC FACINGS

VERY POSITIVE ENGAGEMENT FOR HEAVY DUTY STREET
OR OFF ROAD MOTOR SPORT USE.

THIS KIT USES AN 850KG PRESSURE PLATE WITH 25% INCREASED CLAMP LOAD OVER THE FACTORY ITEM.

CLUTCH PLATE USES A DAMPENED HUB WITH CUSHIONED
CERAMIC FACINGS.

GREAT DRIVEABILITY - RELATIVELY SMOOTH WITH
POSITIVE ENGAGEMENT

FOR STREET OR SPRINT USE

TEFLON BRAIDED HOSE WITH FITTINGS AND ALLOY WASHERS, AND MOTORSPORT HEAT SLAVE TO GO STRAIGHT FROM YOUR CLUTCH MASTER TO SLAVE

LIGHTER AND STRONGER THAN THE FACTORY ITEM

Early 350z only

PRICE: $120.00

LIGHTER AND MUCH STRONGER DESIGN, USING HIGH TENSILE STEEL AND A TAPERED POST WITH RADIUSES INSTEAD OF FACTORY ITEM WITH SHARP CORNERS.

THE TOP BALL IS ALSO LINISHED SMOOTH FOR LESS WEAR ON THE CLUTCH FORK

REPLACES THE FACTORY BRONZE SWEAT BUSH TYPE AS PER PHOTO

STRONGER THAN FACTORY WITH LESS FRICTION

GREDDY SPRINGS

TECH PROGRESSIVE RATE LOWERED

GREDDY PERFORMANCE DAMPER TYPE-S

• 32 LEVEL DAMPING FORCE (COMPRESSION & REBOUND TOGETHER)
• MONOTUBE STRUCTURE
• ADJUSTABLE PILLOW BALL UPPER MOUNTS
• REINFORCED RUBBER UPPER MOUNTS
• ALUMINIUM BRACKETS
• DURABLE LIGHTWEIGHT SPRINGS
• EXTENDED CONTROL CABLE

UAS RACE CAT CONVERTER

HIGH FLOW CORE WITH STAINLESS TAPERED BODY

COMES COMPLETE WITH FLANGES READY TO BOLT UP

3" AND 4" AVAILABLE

DS2500 IS THE LATEST PAD COMPOUND DEVELOPED BY FERODO. IT IS AN EXCELLENT HIGH PERFORMANCE ROAD COMPOUND, AND IS SUITABLE FOR MANY CLUB RACING AND RALLY APPLICATIONS. IT IS EASY TO BED AND OFFERS EXCELLENT BRAKING WITH A HIGH LEVEL OF CONTROLABILITY, AND IS ECONOMICALLY PRICED.

IDEAL FOR HIGH PERFORMANCE ROAD APPLICATIONS

PRICE: $295 PER SET (FRONT)

PRICE: $249 PER SET (REAR)

DS2500 IS THE LATEST PAD COMPOUND DEVELOPED BY FERODO. IT IS AN EXCELLENT HIGH PERFORMANCE ROAD COMPOUND, AND IS SUITABLE FOR MANY CLUB RACING AND RALLY APPLICATIONS. IT IS EASY TO BED AND OFFERS EXCELLENT BRAKING WITH A HIGH LEVEL OF CONTROLABILITY, AND IS ECONOMICALLY PRICED.

IDEAL FOR HIGH PERFORMANCE ROAD APPLICATIONS

PRICE: $297 PER SET (FRONT)

PRICE: $245 PER SET (REAR)

DS3000 IS USED IN MANY APPLICATIONS WHERE A HIGH FRICTION PAD IS REQUIRED. ALTHOUGH IT HAS ONE OF THE HIGHEST FRICTION COEFFICIENTS, IT REMAINS EASY TO CONTROL DUE TO ITS STABLE COEFFICIENT AT ALL TEMPERATURES. IT IS VERY COMMONLY USED IN WORLD RALLY CARS ON TARMAC STAGES AND IN CIRCUIT RACING.

THESE PADS OFFER REDUCED BEDDING-IN TIME, HIGH FRICTION COEFFICIENT, HIGH INITIAL BITE, AND ARE RELATIVELY EASY ON BRAKE DISCS. TYPICAL USES INCLUDE GT PRODUCTION, WORLD RALLY, NATIONAL RALLY & V8 SUPERCARS.

EXTREME ROAD AND RACE APPLICATIONS ONLY

GOODRIDGE BRAIDED BRAKE LINES FOR NISSAN 350Z

ADR APPROVED BRAIDED STAINLESS STEEL BRAIDED BRAKE LINES

IMPROVED BRAKE PEDAL RESPONSE AND FEEL

• MADE FROM AIRCRAFT ALUMINIUM ALLOY
• HARD ANODISED
• KNURLED ENDS FOR QUICK THREADING

AVAILABLE IN 12.5MM X 1.25 OR 12MM X 1.5 THREAD

Project Mu B-Spec Brake Pads Nissan V35/350Z BREMBO

Designed for street and track use

PRICE :

FRONT - $267

REAR - $247

Project Mu HC+ Brake Pads Nissan V35/350Z BREMBO

Premium Street, Race and Rally brake pads.

PRICE :

FRONT - $363

REAR - $341

Project Mu NS Front Brake Pads Nissan BREMBO

Designed for street use

PRICE :

FRONT - $213

REAR - $198