NISSAN TWIN CAM TRIGGER KIT

Metaljacket balancer with trigger wheel mounted and an oil pump drive and gear, the crank sensor mount with sensor inserted .

SUPERTECH HIGH PERFORMANCE VALVES

STAINLESS STEEL

.5MM OVERSIZE

HIGH FLOW RATES, DURABILITY AND QUALITY

FOR MORE INFO:

WWW.SUPERTECHPERFORMANCE.COM

PRICE: $980/SET

COMPLETE WITH MOUNTING BRACKETS, ADAPTER WITH THERMOSTAT, DUCTING (SOME MODELS) BRAIDED LINES AND ALLOY FITTINGS

REMOTE FILTER RELOCATION IS AN EXTRA $250

R34 GTR KIT PICTURED

GATES  RACING  TIMING BELT

• 3 TIMES STRONGER THAN A NORMAL TIMING BELT
• 3 TIMES MORE HEAT RESISTANCE
• 3 TIMES MORE TOOTH STRENGTH THAN FACTORY

INLET AND EXHAUST

R34 GTR SPARK PLUG COVER EMBLEM

SUIT RB26DETT

GENUINE PART

SPLITFIRE DIRECT INGNITION SYSTEM COILS FOR SKYLINE GTR

SUIT RB26DETT

DROP IN REPLACEMENT

GREDDY OVERSIZED PULLEY KIT FOR SKYLINE GTR

GREDDY WATER PUMP, ALT AND POWER STEERING PULLEYS MADE FROM DURALUMIN (A2017) ANNODISED BLUE FOR R32, 33,34 GTR. LESS THAN HALF THE WEIGHT OF FACTORY STEEL ONES FOR IMPROVED THROTTLE RESPONSE. STANDARD SIZE IS $430 SET OF THREE, OR FOR LARGER VERSION HIGH PERFORMANCE RPM ENGINES WITH STRONGER BELTS FOR THE TRACK $495.

ROSS 2 PIECE BILLET TUFFBOND BALANCER FOR RB26DETT

COMPULSARY FOR ALL SUB - 11 SECOND GTR'S

MANUFACTURED FROM BILLET ALLOY Vs FACTORY CAST

WILL NOT FLY APART AT HIGH RPM'S AS CAST FACTORY ONE CAN

WEIGHS 4.1 KG COMPARED TO FACTORY 6.2KG

CAM TIMING MARKS ON UNIT

ANDRA APPROVED

PRICE: $675

ANNODISED AND AROUND HALF THE WEIGHT OF THE FACTORY ITEM

5% LARGER TO SLOW THE PUMP AT HIGH RPM & PRODUCE
SLIGHT POWER GAIN

TO SUIT R32 & R33 GTR

9.15 LIFT / 260 DEGREE DURATION

TO SUIT RB26DETT

PLEASE EMAIL US TO CORRECTLY MATCH CAMSHAFT SPECS

ACL/ROSS FORGED RACING PISTONS

PERFECT FOR HIGH PERFORMANCE ROAD OR RACE USE

THESE PISTONS FEATURE:

• CHAMFERED PORTS AND EDGES
• LOW SILICON CONTENT FOR ADDED STRENGTH
• THICK AND STRONG SKIRTS
• QUALITY GAS NITRIDED STEEL RINGS WITHOUT THE FANCY COATINGS THAT TEND TO WEAR OFF WITH HEAT
• PROVEN RELIABILITY FOR HIGH BOOST AND HIGH HEAT TURBO RACE MOTORS
• EXCEPTIONAL QUALITY

AVAILABLE IN 20 THOU (.5MM) OR 40 THOU (1MM) OVERSIZED

FULLY MACHINED CROWNS INCLUDE VALVE RECESSES READY TO GO

COMES AS SET OF 6 WITH RINGS

• T62816 ALLOY
• CONTACT REDUCTION GROOVES BETWEEN CROWN AND FIRST RING LAND
• ACCUMULATOR GROOVE BETWEEN FIRST AND SECOND RING LAND
• HIGH PERFORMANCE RINGS
• 1st RING CARBON STEEL NITRIDE
• 2nd RING DUCTILE IRON PHOSPHATE
• OIL RING CARBON STEEL NITRIDE
• 9810 TOOL STEEL GUNGEON PINS
• 20 THOU OR 40 THOU OVERSIZED

AVAILABLE FOR:

NITTO RB25/26 H-BEAM CON ROD

ALSO AVAILABLE FOR RB30

NITTO RB25/26 I-BEAM CON ROD

ALSO AVAILABLE FOR RB30

-Stronger and lighter than H-beam.

IDEAL UPGRADE FOR R32 GTR

OPTION R33 GTR N1 HARMONIC BALANCER

CRANK PRICE: $1,390

HARMONIC BALANCER PRICE: $860

POLISHED TANK. FEATURES AUTOMATIC FEEDBACK OF OIL INTO THE SYSTEM. IDEAL FOR GTR'S RUNNING 1 BAR OR MORE OF BOOST - A MUST FOR TRACK DRIVING

NISMO OIL FILTER

FEATURES:

• 21% LESS PRESSURE LOSS
• 24% INCREASE IN FILTRATION
• 10% LESS FLOW RESISTANCE
• 37% INCREASED LIFE

INCLUDES SANDWICH BLOCK, HOSES, FITTINGS & OIL COOLER

28CM BY 21CM OIL COOLER -10 OIL COOLER WITH BRAIDED LINES AND ANNODISED ALLOY FITTINGS

RB Twin Cam Cylinder Head Oil Drain Kit

The kit contains the OIL DRAIN that fits in the back of the cylinder head ( where the OEM welsch plug resides ) , geniune dash 10 SPEEDFLOW FITTINGS , 1 meter of HOSE and a WELD ON FITTING for the sump return. (Available in either alumiminium or steel - depending on sump used.)

COMPLETE OIL COOLER KIT.

COMES WITH QUALITY DASH 10 BRAIDED HOSE, ANNODISED ALLOY FITTINGS, BILLET ALLOY SANDWICH PLATE, IN-LINE THERMOSTAT & 16 ROW OIL COOLER.

OPTIONAL OIL FILTER RELOCATION KIT WHICH GIVES THE ABILITY TO RUN THE LARGER Z9 OIL FILTER BASE FOR LARGER SURFACE AREA AND LESS PRESSURE DROP.

BOLT ON FITMENT

NOTE: KIT CAN BE PURCHASED WITHOUT THERMOSTAT OR RELOCATION KIT AT A REDUCED PRICE.

COMPLETE KIT PRICE: $1,295

WITHOUT THERMOSTAT : $1,000

NO RELOCATION KIT: $1,045

NITTO OIL PUMP

SUITS RB26 AND RB30

PRICE: $1449

PRICE: $650

NEW N1 WATER PUMP. N1 PUMP HAS ANTI CAVITATION PLATE WITH 6 LARGER BLADES COMPARED TO THE FACTORY 8 BLADE.

THE IMAGE TO THE LEFT SHOWS THE NEW N1 PUMP (TOP) COMPARED TO THE FACTORY PUMP (BOTTOM)

PRICE: $390 R33 GTR

PRICE: $455 R32 GTR

TOMEI SUMP BAFFLE KIT TO SUIT SKYLINE GTR

SUIT RB26DETT - COMES COMPLETE WITH LID & BOLTS ETC

UAS RB26 SUMP EXTENSION

LARGER CAPACITY WITH BAFFLES

AVAILABLE IN 500 - 850CC

SUIT RB26DETT

NOTE: SIDE FEED INJECTORS PICTURED

INCLUDES COLLARS, SEALS & 0-RINGS READY TO FIT

PRICE: $220 (EACH)

NISSAN SPECIFIC KIT - RISING RATE

Nismo 550cc, 600cc or 740cc injectors

SARD SURGE TANKS

WITH DUAL SARD 280 LITER PER MINUTE, 700HP.

EACH FUEL PUMP COMES WITH ANNONDISED ALLOY FITTINGS

MAGNA FUEL REGULATOR

700HP DUAL PORT

ALSO 4 PORT UP TO 1500+ HP

DUAL PORT PRICE: $395

4 PORT PRICE: $495

BOSCH 044 FUEL PUMP

CAN SUPPORT UP TO 700HP

255 LITRES PER HOUR, IN TANK FUEL PUMP WITH FITTING KIT

FULL METAL GASKET KIT INCLUDES:

HEAD,EXHAUST & INLET GASKETS

COMPLETE GASKET KIT FOR RB26

NITTO DRAG METAL HEAD GASKET

SIZES:

NITTO RB26 INTAKE AND EXHAUST METAL GASKET KIT

NITTO RB26 FULL GASKET KIT (INC METAL TB AND EXH KIT)

UAS UPGRADE RADIATOR FOR SKYLINE R32 GTR

42MM

OPTIONAL TWIN PASS EXTRA $100

UAS TWIN PASS RADIATOR FOR SKYLINE R34 GTR

57MM

Requires use of 16inch SPAL fan $270 optional alloy fan shroud with flaps extra $250

UAS TWIN PASS RADIATOR FOR SKYLINE R33 GTR

57MM

Requires use of 16inch SPAL fan $270 optional alloy fan shroud with flaps extra $250

UAS UPGRADE RADIATOR FOR SKYLINE R32 & R33 GTR

32MM

(FACTORY UNIT IS 25MM)

SUIT R32 AND R33 GTR ONLY

SPAL 16" THERMO FAN FOR SKYLINE R32 & R33 GTR

Motorsport version higher flow $390

ENHANCE THE LOOK OF YOUR ENGINE BAY

PRICE: $195

TNA

2 PIECE SILCON PIPING KIT

AVAILABLE IN RED OR BLUE

2 PIECE HIGH PERFORMANCE RADIATOR HOSE KIT

FEATURES ARAMID CONSTRUCTION USING HIGH TEMP MATERIALS

R33 -34 GTR BREATHER HOSES

SILICON REAR HEATER HOSES FOR GTR R32-33-34

DURABLE 4 PLY

14 PIECES SET

INCLUDES HEATER HOSES

6 MONTH WARRANTY

AVAILABLE IN BLACK, BLUE OR RED.

PRICE: $310

INCLUDES CLIPS

PRICE: $585

PRICE: $380