UAS STAGE 1 FRONT BRAKE UPGRADE

GTiR 320MM SLOTTED FRONT ROTORS, R32 GTR CALIPERS, ADAPTERS AND BOLTS INCLUDED. DOES REQUIRE MIN 17" WHEELS

GREDDY SPRINGS

TECH PROGRESSIVE RATE LOWERED

GOODRIDGE BRAIDED BRAKE LINES FOR PULSAR GTiR

ADR APPROVED BRAIDED STAINLESS STEEL BRAIDED BRAKE LINES

IMPROVED BRAKE PEDAL RESPONSE AND FEEL

BOLT ON FITMENT FOR GTI-R.

WILL ALSO FIT N14 SSS

BOLT ON FITMENT FOR GTI-R.

ALLOY VALVE CAPS

WITH NISMO LOGO

INTERCOOLER KIT FOR PULSAR GTI-R

GREAT VALUE KIT WITH ALL PIPING AND FITTINGS INCLUDED

AVAILABLE WITH SILVER OR ANNODISED BLUE PIPING

COMBINED ENGINE & NON-TURBULENCE DUMP PIPE

USES 3 INCH MANDREL BENDS

NOTE: DUMP PIPE ONLY SUITABLE FOR USE WITH THIS ENGINE PIPE

UAS 3 INCH RACE CAT CONVERTER

HIGH FLOW CORE WITH STAINLESS TAPERED BODY

COMES COMPLETE WITH FLANGES READY TO BOLT UP

HIGH PERFORMANCE BOLT ON TURBOCHARGER UPGRADE FOR SR20DET

RATING: 280PS
FLANGE: T25
A/R: 0.64

INTERNAL WASTEGATE

SR20, 20 THOU (.5MM) OR 40 THOU (1MM) OVERSIZED WITH RINGS AND PINS

255 LITRES PER HOUR, IN TANK FUEL PUMP WITH FITTING KIT

19 x 10 row

NISMO OIL FILTER

FEATURES:

• 21% LESS PRESSURE LOSS
• 24% INCREASE IN FILTRATION
• 10% LESS FLOW RESISTANCE
• 37% INCREASED LIFE

AVAILABLE IN 500 - 850CC

SUIT SR20DET (PULSAR GTIR)

NOTE: SIDE FEED INJECTORS PICTURED

INCLUDES COLLARS, SEALS & 0-RINGS READY TO FIT

PRICE: $220 (EACH)

TURBOSMART E-BOOST 2 ELECTRONIC BOOST CONTROLLER

"BOOST + RPM = TOTAL CONTROL"
LOTS OF NEW FEATURES THAT INLUDE: FULLY PROGRAMMABLE AUX OUTPUT CONTROLS WATER SPRAY, METHANOL OR NITRUOS AGAINST BOOST OR RPM; BOOST LEVELS CAN BE MAPPED AGAINST TIME AND RPM; RPM COMPENSATION FEATURE ELIMATES BOOST DROP OFF AT HIGH RPM... CLICK HERE FOR MORE INFORMATION

CAN BE PURCHASED AS A BUNDLE INSTALLED WITH AUTOMETER GAUGE CUP.

E-BOOST 2 PRICE : $795

BUNDLE PRICE: $1,120

THIS SHIFT KNOB WAS DESIGNED BY MR JUN SAN CHEN HIMSELF. IT IS WHAT HE USES TO WIN RACE IN HIS RACE CARS WITH FLOOR MOUNTED SHIFTERS SUCH AS THE ALTEZZA, CHASER AND HONDA DC5

CHROMED GEAR KNOB WITH SHIFT PATTERN

UNIVERSAL GAUGE SIZE, CAN BE DRILLED OUT TO SUIT YOUR GAUGES.

ALSO SUITS N12/N13 & N14 PULSAR

XTREME CHROME MOLLY ONE PIECE FLYWHEEL FOR PULSAR GTI-R

SUIT NISSAN SR20DET ENGINE - WEIGHS 5.5KG

ULTRALIGHT VERSION ALSO AVAILABLE WEIGHING ONLY 4.3KG

PRICE: $440

PRICE: $495 (ULTRALIGHT VERSION)

XTREME BILLET FLYWHEEL FOR NISSAN PULSAR GTI-R

BILLET ALLOY FLYWHEEL WITH BILLET STEEL FACE. COMES WITH
HEAT TEMPERED RING GEAR, LOCATING DOWELS AND LOCTITE

WEIGHS 4.3KG

PRICE: $570

FEATURES REPLACEABLE STEEL FACE - WEIGHS APPROX 4.3KG

CLICK HERE FOR MORE INFORMATION

ORGANIC SPORTS CLUTCH FEATURING 30% INCREASED CLAMP LOAD AND MADE WITH STEEL BACKING FOR STRENGHENED CLUTCH PLATE. EACH UAS CLUTCH IS TESTED AND THE CLAMP LOAD IS WRITTEN ON PRESSURE PLATE.

PRICE: $450 EXCHANGE

PRICE: $595 OUTRIGHT

TEFLON BRAIDED HOSE WITH FITTINGS AND ALLOY WASHERS, AND MOTORSPORT HEAT SLAVE TO GO STRAIGHT FROM YOUR CLUTCH MASTER TO SLAVE

LIGHTER AND STRONGER THAN THE FACTORY ITEM

PRICE: $120

LIGHTER AND MUCH STRONGER DESIGN, USING HIGH TENSILE STEEL AND A TAPERED POST WITH RADIUSES INSTEAD OF FACTORY ITEM WITH SHARP CORNERS.

THE TOP BALL IS ALSO LINISHED SMOOTH FOR LESS WEAR ON THE CLUTCH FORK

REPLACES THE FACTORY BRONZE SWEAT BUSH TYPE AS PER PHOTO

STRONGER THAN FACTORY WITH LESS FRICTION

ALLOY REAR CRADLE SPACERS FOR NISSAN PULSAR GTI-R

TEIN SUPER STREET COILOVERS FOR NISSAN PULSAR GTI-R

• 16 LEVELS OF DAMPENING FORCE ADJUSTMENT
• ADJUSTABLE RIDE HEIGHT
• IDEAL FOR STREET AND RACE USE
• HIGH PERFORMANCE AND EXTREMELY COST EFFECTIVE
• REBUILDABLE DAMPER FOR REPAIR/OVERHAUL OR REVALVING
• EXCLUSIVELY DESIGNED FOR AUSTRALIAN APPLICATIONS

• MADE FROM AIRCRAFT ALUMINIUM ALLOY
• HARD ANODISED
• KNURLED ENDS FOR QUICK THREADING

AVAILABLE IN 12.5MM X 1.25 OR 12MM X 1.5 THREAD